ANTI STATIC UNTUK PABRIK CAT – HUBBELL-INDONESIA

Anti Static untuk Pabrik Cat (Paints & Coatings)

MULTIPOINT SYSTEM – Alat anti static grounding untuk Peralatan Pabrik Industri yang dapat dikontrol/terhubung dengan PLC/DCS/Relay maupun
Solenoid Valve

Specification Multipoint Newson Gale Static Interlock Grounding Device
Monitoring unit Zone 0/20 Installations Ambient Temperature Range 40C to + C 60 Ingress Protection IP 66 Construction Stainless Steel 304 Monitoring Circuit Intrinsically Safe Operational Series Ground Resistance Nominally ≤10 Ohm Cable Entries 3 x M20, 1 x M25 Marshalling Junction Box Enclosure Material GRP with carbon loading Cable Entries 8 W – 10 x M20, 1 x M25 4 W – 6 x M20, 1 x M25 Power Supply Unit Zone 2/21 Installations Power Supply 110 V or 240 V AC , 50-60 Hz Current Rating 200 mA Power Rating 10 Watts Ambient Temperature Range -40C to +60C Ingress Protection IP 66 Construction GRP with carbon loading Output to Monitoring Unit Intrinsically Safe Output Channel Relay 8 off Voltage free change over switch contacts Output Group Relay 2 off Voltage free change over switch contacts Output Fault Relay 1 off Voltage free change over switch contacts Relay Contact Rating 240 V AC, 5 A, 500 VA max resistive 30 V DC, 2 A, 60 W max resistive Cable Entries 12 x M20

Solvents and combustible organic powders are heavily utilised constituents of decorative and protective paints and coatings.

Although more stringent VOC targets are in place, the use of solvents is still important in aerospace, marine, electronics and general industrial protective coating applications.
The milling, grinding and extraction of organic powders and mixing and blending of solvents can generate hazardous levels of static electricity and this risk must be managed
effectively through the application of fit for purpose grounding and bonding static control equipment.

Pelarut dan bubuk organik yang mudah terbakar yang sangat dimanfaatkan pemakai cat dekoratif dan protektif dan coating.

Meskipun target VOC lebih ketat di tempat, penggunaan pelarut masih penting dalam udara, kelautan, elektronik dan aplikasi
lapisan pelindung industri umum. Penggilingan dan ekstraksi bubuk organik dan pencampuran dan pencampuran pelarut
dapat menghasilkan tingkat listrik statis berbahaya dan risiko ini harus dikelola secara efektif melalui penerapan cocok untuk tujuan
pentanahan/grounding dan Bonding pada peralatan untuk mengontrol muatan/listrik statis.

Tank Truck Filling & Emptying (Earthing Switch for Avtur Area)

Alat Pembuang Grounding Muatan Listrik Statis saat bongkar muat BBM dan Bahan Kimia (Toulene dsb)
Earth-Rite RTR Static electricity can lead to large voltages on tank trucks.
> Earth-Rite RTR

Truck Grounding Static Monitoring

Railcar Filling & Emptying

Earth-Rite PLUS Grounding and interlocks preventing charge accumulation on the tanks of railcars.
> Earth-Rite PLUS

Anti-statik Earthing Cable untuk Container Cat Thinner Filling IBCs & Large Containers

Earth-Rite PLUS The manual filling of portable drums and vessels can result in incendive static spark discharges.
> Earth-Rite PLUS

FIBC Filling & Emptying

Earth-Rite FIBC Grounding and interlocks for Type “C” Big Bag operations.
> Earth-Rite FIBC

Filling & Emptying Small Drums & Cans

Cen-Stat Clamps For low volume liquid transfer.
> Cen-Stat Clamps

Filling & Emptying Drums & Cans

Bond-Rite Clamp Patented grounding clamp with LED ground status indicator.
> Bond-Rite CLAMP

Anti Static untuk Pabrik Cat (Paints & Coatings)

MULTIPOINT SYSTEM – Alat anti static grounding untuk Peralatan Pabrik Industri yang dapat dikontrol/terhubung dengan PLC/DCS/Relay maupun Solenoid Valve

MULTIPOINT SYSTEM – Alat anti static grounding untuk Peralatan Pabrik Industri yang dapat dikontrol/terhubung dengan PLC/DCS/Relay maupun
Solenoid Valve